 |
TH20T10025C7
Tonhe
8504409999
Brief Introduction of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
TH20T10025C7 is one high efficiency and high power density charging module specially designed by Tonhe for EV charging station. This product can support AC and DC dual kinds of input modes. AC input is a three-phase four-wire system (three-phase +PE) input, supports 285VAC-475VAC input, and the maximum power is 20KW; DC input range is 300VDC-810VDC and the max output power is 20KW. The charging module communicates with the main monitoring through the CAN bus, and realizes the parameter setting of the charging module through the communication with the main monitoring, collects the operating parameters of the charging module, and controls the working state of the charging module.
Input of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
1.AC input features
Operating Voltage （AC） | 285V~475V，rated voltage 380V AC |
Input Frequency （HZ） | 45~55 |
Power Factor Full load | ≥0.99 |
THD Full load | ≤5% |
Standby Power Consumption | ＜12W |
Maximum input current | 38A |
2.DC Input features
Operating Voltage （DC） | 300V~810V DC，rated voltage 750V DC |
Input Frequency （HZ） | 45~55 |
Power Factor Full load | ≥0.99 |
THD Full load | ≤5% |
Output of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
Output voltage range（DC）: 50~1000V DC
Max output current（A）: 67A
Output Constant Power Range :300~500VDC，500~1000VDC
Output Limit Current Range : Max limit current is 67A，limit current point can be set in 0.5~67A
Voltage stabilization accuracy ≤±0.5% ;The output voltage is over 200V and Current stabilization accuracy ≤±1%（20%-100% load current);The output voltage is over 200V .
Remark: Operating Voltage （AC） 285V~475V，rated voltage 380 See input voltage/output power curve
Automated production of Smart EV charging modules
Workshop of 20kw Smart EV charging modules
Debugging of the 20kw smart EV Charging modules
Assembling of the 20kw Smart EV charging modules
Aging of the 20kw smart EV charging modules
Qualification certificate
FAQ
1 What are modules of communication protocol?
For our EV charging modules communication protocol is CAN and the CAN baud rate is 125kbs, the CAN voltage level is 5v.
2. Do the modules support glue filling?
Yes, All series modules can support glue filling.
3. What are the requirements for the installation method of the charging module?
The charging module can be installed horizontally, side standing or upside down. If upside down installation is used, please contact our company to customize the front panel without a handle.
4. How do you handle shipments?
A: 1. For small orders, we send goods by FedEx, DHL, UPS, express service on door to door term.
2. For large shipments, we send goods by sea or by air in containers.
Ps. it's highly recommended to delegate your own forwarders to handle shipments and FOB Shijiazhuang is widely adopted by our customers.
5. What is your delivery time?
Factory direct sales and we could offer the short lead time. Normally, we need about 7days quantity at least 10pcs. And the samples in stock and do not worried. For orders in large quantities and customized orders, the time for shipment will be a little longer, we need 35 days to coordinate with our workshop to give accurate time frame to our customers.
6 .What is your term of payment?
Our standard term is 100% TT advance with order. However, it is negotiable under the condition of long-term strategic cooperation, there will 50% in advance and 50% before the delivery, or 30% at first and 70%when the goods are ready, all the details and we could negotiate them according your project progress.
7. What are your customized services?
The OEM and ODM solutions could available, we could write your company name, logo and model number on nameplate, also the colour and shape you also could send your requirements and we offer the solution.
8. How long is the warranty?
Standard warranty is 12 months upon the receipt of shipment.
9.Can you provide after-sale service?
We can provide both online and on-site after-sale service depending on respective contract and actual conditions. Considering the project, We promise 24hr-response scheme.
10. What certifications have you obtained for your company and products?
The ISO9001, IATF16949 automobile quality management system certification and double software certification; CE, TUV, etc., For now, our charging modules&EV chargers have been exported to overseas countries, including Australia, Russia, Germany, Italy, Turkey, India, Poland, Thailand, Singapore, Vietnam, Brazil, Colombia, etc.
Application Cases of Smart EV charging modules in EV charging stations
The 20 kw modules could used in Eco-friendly EV chargers, Fast EV chargers, home EV chargers, business EV chargers, Type 2 EV chargers, smart EV charging accessories.
Brief Introduction of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
TH20T10025C7 is one high efficiency and high power density charging module specially designed by Tonhe for EV charging station. This product can support AC and DC dual kinds of input modes. AC input is a three-phase four-wire system (three-phase +PE) input, supports 285VAC-475VAC input, and the maximum power is 20KW; DC input range is 300VDC-810VDC and the max output power is 20KW. The charging module communicates with the main monitoring through the CAN bus, and realizes the parameter setting of the charging module through the communication with the main monitoring, collects the operating parameters of the charging module, and controls the working state of the charging module.
Input of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
1.AC input features
Operating Voltage （AC） | 285V~475V，rated voltage 380V AC |
Input Frequency （HZ） | 45~55 |
Power Factor Full load | ≥0.99 |
THD Full load | ≤5% |
Standby Power Consumption | ＜12W |
Maximum input current | 38A |
2.DC Input features
Operating Voltage （DC） | 300V~810V DC，rated voltage 750V DC |
Input Frequency （HZ） | 45~55 |
Power Factor Full load | ≥0.99 |
THD Full load | ≤5% |
Output of TH20T10025C7 AC DC dual inputs 20kw Smart EV charging modules
Output voltage range（DC）: 50~1000V DC
Max output current（A）: 67A
Output Constant Power Range :300~500VDC，500~1000VDC
Output Limit Current Range : Max limit current is 67A，limit current point can be set in 0.5~67A
Voltage stabilization accuracy ≤±0.5% ;The output voltage is over 200V and Current stabilization accuracy ≤±1%（20%-100% load current);The output voltage is over 200V .
Remark: Operating Voltage （AC） 285V~475V，rated voltage 380 See input voltage/output power curve
Automated production of Smart EV charging modules
Workshop of 20kw Smart EV charging modules
Debugging of the 20kw smart EV Charging modules
Assembling of the 20kw Smart EV charging modules
Aging of the 20kw smart EV charging modules
Qualification certificate
FAQ
1 What are modules of communication protocol?
For our EV charging modules communication protocol is CAN and the CAN baud rate is 125kbs, the CAN voltage level is 5v.
2. Do the modules support glue filling?
Yes, All series modules can support glue filling.
3. What are the requirements for the installation method of the charging module?
The charging module can be installed horizontally, side standing or upside down. If upside down installation is used, please contact our company to customize the front panel without a handle.
4. How do you handle shipments?
A: 1. For small orders, we send goods by FedEx, DHL, UPS, express service on door to door term.
2. For large shipments, we send goods by sea or by air in containers.
Ps. it's highly recommended to delegate your own forwarders to handle shipments and FOB Shijiazhuang is widely adopted by our customers.
5. What is your delivery time?
Factory direct sales and we could offer the short lead time. Normally, we need about 7days quantity at least 10pcs. And the samples in stock and do not worried. For orders in large quantities and customized orders, the time for shipment will be a little longer, we need 35 days to coordinate with our workshop to give accurate time frame to our customers.
6 .What is your term of payment?
Our standard term is 100% TT advance with order. However, it is negotiable under the condition of long-term strategic cooperation, there will 50% in advance and 50% before the delivery, or 30% at first and 70%when the goods are ready, all the details and we could negotiate them according your project progress.
7. What are your customized services?
The OEM and ODM solutions could available, we could write your company name, logo and model number on nameplate, also the colour and shape you also could send your requirements and we offer the solution.
8. How long is the warranty?
Standard warranty is 12 months upon the receipt of shipment.
9.Can you provide after-sale service?
We can provide both online and on-site after-sale service depending on respective contract and actual conditions. Considering the project, We promise 24hr-response scheme.
10. What certifications have you obtained for your company and products?
The ISO9001, IATF16949 automobile quality management system certification and double software certification; CE, TUV, etc., For now, our charging modules&EV chargers have been exported to overseas countries, including Australia, Russia, Germany, Italy, Turkey, India, Poland, Thailand, Singapore, Vietnam, Brazil, Colombia, etc.
Application Cases of Smart EV charging modules in EV charging stations
The 20 kw modules could used in Eco-friendly EV chargers, Fast EV chargers, home EV chargers, business EV chargers, Type 2 EV chargers, smart EV charging accessories.
